P-Bandai: MG 1/100 F80 Gunraid – Release Info

Thoroughly reproduce the F80

The new F80 is reproduced with new molding.

The two blade antennas on the head are equipped with movable axes to reduce interference with posing.

Various weapons are included
The short beam rifle is reproduced with new molding.
In addition, various orthodox weapons such as a beam bazooka, beam saber, and shield are included.

The beam bazooka is the same as that used in the Mission Pack Type A. It can be hung from the rear waist hard point. The energy pack is detachable and can be equipped to the waist side hard point.

The Beam Saber Rack on the backpack can be removed and the Triple Machine Cannon can be attached to the backpack.

The barrels of the Triple Machine Cannon can rotate not only up and down but also left and right to follow poses. A grip can be equipped to the Beam Saber Rack and the base of the rack can be moved back and forth.

The F80 Gunraid, a mass-produced prototype mobile suit from the Formula Project by SNRI, joins the MG lineup with all-new molding. Featuring a wide array of weapons and mission pack compatibility.

The F80 Gunraid was developed under SNRI’s Formula project to mass-produce the F90 Gundam F90 for the Earth Federation Forces’ RGM-X project. To simplify production, it removed experimental features like micro-honeycomb armor and the holo-cube computer but retained the F90’s 11 hardpoints. It also used the F70 Cannon Gundam’s movable frame and standardized components, ensuring compatibility with EFF mobile suits like the RGM-109 Heavygun and F71 G Cannon. This allowed the F80 to maintain solid performance and use F90 mission packs or the F70’s backpack when needed.

Despite its strengths, the F80 had drawbacks. Cost-cutting measures reduced mobility, slowed reaction time, and increased weight compared to the F90. The lack of a holo-cube computer made field mission pack swaps impractical, as system reconfiguration was required. Although intended for mass production, it was more expensive to build than Anaheim’s RGM-119X Proto Jamesgun and RGM-111 Hardygun. Due to these issues, only 16 units were produced, mostly assigned to ECOAS, the EFF Marine Corps, and private military contractors.

Mobile Suit Gundam F90 Cluster Appearance / Variants

The F80 Gunraid is featured in Mobile Suit Gundam F90 Cluster and is equipped with the F70-type backpack, which incorporates a Triple Machine Cannon and Beam Sabers mounted on both sides.

Additionally, the F80 Death Guns Specifications were customized for the Death Guns mercenary squad. This variant featured an enhanced operating system, significantly boosting performance to rival specialized Newtype mobile suits. The known units include:

NOTE: Mission packs are sold separately

• Commander Type (Gunmad’s Unit) – Equipped with the O-Type mission pack and a slightly altered forehead camera.
• Ian’s Unit – Equipped with the Q-Type mission pack.
• Dodonga Don’s Unit – Equipped with the G-Type mission pack.

Key Features:

• Newly Molded F80 Gunraid – Recreated with sharp detailing and mechanical accuracy. The dual blade antennas on the head feature movable axes, ensuring seamless articulation without interference.
• Diverse Armament Loadout – Includes a newly molded short beam rifle, alongside:
• Beam Bazooka – Based on the Mission Pack A Type, mountable on the rear waist hard point.
• Beam Sabers (x2) – Stored in a backpack rack, which can be swapped for the Triple Machine Cannon.
• Triple Machine Cannon – Features rotating barrels that move vertically and horizontally for dynamic posing.
• Shield
• Detachable Energy Pack – Mountable on the waist side hard point.
• Mission Pack Compatibility – Designed for select A to Z PROJECT mission packs, allowing further customization. (Note: Some mission packs may not be compatible.)’
• Water Transfer Decals – Includes original markings to enhance detail and realism.

Included Equipment

• Weapons: Short beam rifle / Beam sabers x2 (including spare) / Beam bazooka / Shield / Triple machine cannon
• Accessories: Mission pack replacement parts for arm unit